General purpose PVA
Features and benefits
EVO-STIK Super Evo-Bond PVA is ready to use and is suitable for a wide range of building jobs. It is a highly effective primer, admixture, bonding agent, dustproofer and may also be used as an adhesive. EVO-STIK Super Evo-Bond PVA is economical, and suitable for interior use and dry service conditions. For damp or external situations EVO-STIK Waterproof Evo-Bond PVA is recommended.
EVO-STIK Super Evo-Bond PVA can be used as a primer to improve adhesion to porous or difficult surfaces prior to rendering, plastering, or screeding. This PVA can be used as an admixture to improve workability and adhesion of cement/sand mortars, renders, gypsum plasters, or screeds. Can be used as a sealer to reduce dusting of concrete and plaster surfaces.
Suitable materials: a range of materials, provided one of the surfaces is porous e.g. timber, polywood, blockboard, chipboard, fibreboard, expanded polystyrene, polyurethane foam, insulating board, brick, concrete, plaster, stone and slate.
Sizes: 500ml (SKU 30811823), 1 litre (SKU 30811828), 2.5 litres (SKU 30811829) or 5 litres (SKU 30811830)
Frequently Asked Questions
EVO-BOND PVA is white before use, but it dries to a transparent film.
No - it would initially work, but PVA has low wear resistance. It will also turn hazy white every time it gets wet.
No - it may leave areas with a sealed and shiny finish. Paint may then not be absorbed into those areas and could peel off. Instead, use a primer that’s recommended by the paint manufacturer.
DOCUMENTATION
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS
The Safety Data Sheet for this product is available on an external website. Follow the link to download.